9 스테인리스 스틸 주얼리 가공 기술

The common stainless steel jewelry processing techniques can further deepen your understanding of titanium steel jewelry. The editor has summarized the following 9 common techniques.

1、 Carbon fiber inlay

Carbon fiber can be used on stainless steel jewelry to give the surface of the jewelry a three-dimensional fibrous shape. If light reflection is used, it will move up and down with your line of sight, presenting a three-dimensional effect, which is very beautiful and can fully demonstrate the trend of stainless steel jewelry. On the other hand, the price of embedding carbon fiber in titanium steel jewelry is also relatively expensive.

2、 Resin inlay

When setting resin in stainless steel jewelry, the jewelry should be heated at high temperature first, and then the resin should be applied to the surface of the jewelry. Due to the heating treatment, it will not easily fall off during the wearing process.

3、 Wire cutting

One of the techniques for processing stainless steel jewelry is wire cutting. The use of wire cutting technology for processing involves using molybdenum wires of different sizes and a wire cutting machine to slowly cut out the shape of the jewelry, and then manually polish it. The more complex and difficult the style, the longer the shipping time.

4、 Zircon inlay

There are two ways to embed zircon in stainless steel jewelry processing. One is to use AB glue to directly stick it on. This is a special adhesive for attaching jewelry, which is very strong and does not have to worry about easy detachment. There is another method, 기계 프레스와 임베딩을 사용하는 방법입니다, 복잡하고 정교한 작업이 필요하지만, 가격은 AB 접착제보다 훨씬 비쌉니다.

5、 표면 연마

귀금속 가공 공장에서 사용하는 연마 표면 기술, 쉽게 말하면, 고속 회전하는 면 연마 휠에 연마 왁스를 바르는 것입니다. 천 휠을 귀금속과 접촉시키면, 귀금속 표면이 반짝이고 빛을 반사할 수도 있습니다.

6、 샌드블라스팅

작동 원리: 모래를 물에 넣습니다, 연마액 펌프와 압축 공기를 사용하여, 스프레이 건을 통해 스테인리스 귀금속 표면에 연마액을 고속으로 분사합니다, 은회색 코팅이 형성되어 귀금속을 더 아름답게 보이게 하고 색상 내성 효과를 줍니다.

7、 정밀 다이캐스팅

The commonly used technique in jewelry processing factories is precision die-casting. Generally, the desired jewelry sample is first carved out with wax, then placed in gypsum, deparaffinized, and the raw materials are dissolved at a high temperature of 1500-2000 degrees Celsius. Then poured into the gypsum mold, and subjected to processes such as pressure, demolding, and manual polishing, which are also quite complex processes. The price may vary depending on the gypsum molds required for die-casting.

8、 Lasha surface

The sanding process uses sandpaper tape to create a frosted effect on the surface of stainless steel jewelry, giving the jewelry a matte finish.

9、 Vacuum electroplating

Vacuum electroplating in jewelry processing factories can be divided into several types. The vacuum electroplating process used in stainless steel jewelry processing is mainly furnace vacuum electroplating. Electroplating such a film can form a protective film on the surface of the jewelry, deposit an 18k gold film layer, and extend the color retention time.